When Should You Drive A Forklift Backwards?

Why do forklifts have two brake pedals?

Its function is twofold.

It initially acts as a brake and secondly disengages the transmission, allowing the engine speed to increase or decrease without affecting the drive of the forklift.

This process allows the forklift to be slowed or stopped while at the same time allowing the engine speed to be raised..

When traveling with empty forklift the forks should be in what position?

Also question is, when traveling with or without a load the forks should always be? Figure 7. Traveling down ramp without load. Requirements and Recommended Practices: When traveling without a load, the forks should point downgrade, regardless of direction of travel.

Is a forklift deemed unsafe if the horn doesn’t work?

A forklift is deemed unsafe if the horn doesn’t operate. … A forklift is deemed unsafe if the horn doesn’t operate.

Why are forklifts so dangerous?

There are many factors that explain why forklifts are dangerous: … The load of a forklift is carried in the front of the vehicle, blocking the line of sight of the operator. Forklifts are frequently required to lift heavy loads to high places. Mistakes made during lifting can lead to serious injuries from falling loads.

How soon should repairs be made to a forklift?

The more you use your forklift, the more often you should have it serviced by a factory trained technician. A forklift that gets heavy use might require a forklift maintenance visit every 90 days. Be sure to keep a copy of the items inspected on file in case OSHA requests that information.

How high should forks be when driving forklift?

4-6 inchesForks: Driving A properly trained operator will carry his forks or load 4-6 inches off the ground. This position is high enough to reduce contact with dock plates, expansion joints in concrete, uneven areas, slight slopes, inclines and debris on operating surfaces.

Is driving a forklift bad for your back?

The most common injuries associated with operating a forklift include: Neck and back pain due to vibration, sitting for long periods of time, poor posture and shifting into an awkward position to maintain visibility. … Musculoskeletal injuries from repetitive movements.

Is forklift driving hard?

Driving forklift is not complicated as it seems. Just like an ordinary sedan car, a forklift can be fairly easy to operate. It only takes short time and little practice for you to get a grasp of it. But make no mistake, just because it is easy to operate, does it mean you will put your guard down.

What is the number one cause of forklift accidents?

Forklift overturnsForklift overturns are the leading cause of fatalities involving lift trucks. Overturns can be caused by: Improper turning. Driving with an elevated load.

What is the minimum safe distance to drive behind another forklift?

Falling distance of an object from a pallet or 15 feet, 5 Feet both sides, 5 Feet Rear of Forklift. do so (ALL CLEAR). Do not pass under the forks while in operation.

How do you drive a forklift backwards?

Reversing the ForkliftKeep a clear view in the direction of travel.Look in the direction of travel. … Always be aware of limited visibility, and use extra caution when driving in reverse.Consider using ground guides, rear-view mirrors, spotters, or other aids to increase visibility while operating in reverse.More items…•

When moving the forklift in reverse you must?

Look in the direction of travel. When reversing, look behind. [29 CFR 1910.178(n)(6)] Be aware of limited visibility, and use extreme caution when driving in reverse.